|
|
Post by crazytrain on Jan 18, 2008 21:20:07 GMT -5
I'm new to the boards and starting to amass a small collection of Xevoz. I have extras of some and want to do some customs. What kind of paints are recommended to use? I've seen pictures of some that are just incredible. I appreciate any advice. Thanks!
|
|
|
|
Post by MXC-087 on Jan 19, 2008 9:53:14 GMT -5
Welcome to the boards! Mostly, I use Testors acrylics, but the Wal-Mart I buy them from seems to have them on clearance, so it's possible that the kind I prefer is being phased out in favor of the thinner Model Masters acryl. Also highly recommended is Tamiya's acrylics, especially the transparent colors.
(PS: How are you "starting" to amass a small collection of Xevoz? eBay?)
|
|
|
|
Post by crazytrain on Jan 19, 2008 19:00:01 GMT -5
Thanks for the info. As far as the figures go, unfortunately I've had to use ebay. I've bought a few lots and some from some on-line stores that still have them. I think I've got around 50 and still need Shield Breaker, Storm Wing and Tomb Wraith. From what I understand, I'm going to have to take out a second mortgage to get those. I still kick myself for not buying more of these when they were out. Again, I appreciate the info on the paint. I'll post pictures when I finish my first one.
|
|
|
|
Post by Squishee Slinger on Jan 19, 2008 20:14:40 GMT -5
Use a spray primer on them first. They'll come out lightyears better.
|
|
|
|
Post by greyloch on Jan 19, 2008 20:24:33 GMT -5
I've used combinations of Testors enamels, Tamiya acrylics (esp. the transparent colors - they create great effects), and Krylon leafing pens (gold & silver) on my re-paint projects. I've also used automotive color-shifting paints (Dupli-color) on one project that turned out really nice.
I heartily recommend using a sealant to keep the custom paint jobs from getting ruined as easily. If you're going to do massive repaints on a figure, SS is right, use a paint primer first. I also use a fine grit sandpaper to roughen up painting surfaces so that the paint can get a better grip on whatever you're painting. And whenever you can, please use adequate ventilation. The automotive paints really did a number on my lungs for a good bit. Coughing up the aerosols and pigments was NOT a lot of fun.
Hope this helps.
|
|
|
|
Post by crazytrain on Jan 20, 2008 20:07:11 GMT -5
Thanks guys, I will give those suggestions a try.
|
|
|
|
Post by werewolfwonders on Jan 22, 2008 17:55:42 GMT -5
if you get a small cup and put some spray paint in and use a paint brush to dip in and paint it works for me
|
|
|
|
Post by werewolfwonders on Jan 30, 2008 21:59:50 GMT -5
or air brushing works witch ever one is better
|
|
|
|
Post by greyloch on Feb 11, 2008 8:09:10 GMT -5
I'd also suggest using dyes on some figures you would like to customize. I've done a sizeable number of my custom figures using only red, blue, and black RIT dyes. It's an easy way to customize if you're looking to have a uniform color on multiple pieces.
|
|
