|
Post by author on Jul 1, 2007 13:41:40 GMT -5
does anyone know how i can tighten up loose ball-and socket joints? i really dont know how, and my infiltraitors legs are really loose.
|
|
|
Post by greyloch on Jul 1, 2007 15:38:31 GMT -5
does anyone know how i can tighten up loose ball-and socket joints? i really dont know how, and my infiltraitors legs are really loose. I've read about 2 things: silly putty and nail polish. Paint one or two layers of nail polish on the ball part of the socket, let it dry completely and this should do the trick. Same goes with silly putty, just a little bit in the socket. Hope this helps.
|
|
|
Post by FratMonkey on Jul 2, 2007 10:51:43 GMT -5
Ah yes. I remember having the same problem. I found that nail polish works best. If the joint is a little loose put 1 or 2 layers on it. If its really loose you can go to the extreme of like 6 or 7 layers.
|
|
|
Post by Grayfox on Jul 2, 2007 15:56:46 GMT -5
Ah yes. I remember having the same problem. I found that nail polish works best. If the joint is a little loose put 1 or 2 layers on it. If its really loose you can go to the extreme of like 6 or 7 layers. To that I would add to make sure you assemble the two pieces after each coat. Because if you put on too many coats of nail polish and you assemble the pieces, the nail polish will just scrape off. Just do one coat, let it dry completly, then try it. If it's still loose, repeat the process.
|
|